Cable to Offset Bus PROTECTORS

Ferraz Shawmut CP Cable Protectors are special

purpose limiters which are crimped or bolted to cables or terminals to clear and isolate faultsquickly, increasing the reliability of service entrance and distribution runs. They are current limiting witha 200,000A interrupting rating, yet will carry low cable overloads which are handled by standard proÂtective devices. Cable Protectors are rated in terms of cable size and material (Al or Cu). Heavier duty CPH Cable Protectors are available on special order. Heat shrinkable (HS) tubing can be specified for field installation. Refer to the Application Information Section for more information

Features/Benefits

1. Fiberglass bodies for dimensional stability in harsh environments

2. Catalog number stamped into terminal for permanent identification

3. Crimp terminals for aluminum cable include oxide inhibitor

4. Molded rubber boots or heat shrinkable tubing available for insulation and protection

5. Current limiting device

6. Permitted by code

(905) 458 7027

Fuses & Accessories

Sub Categories