Allows two-way communication with a central station after an alarm, paging and listening from an on-premises or remote phone, annunciation of alarm and zone by voice, and voice messaging. After an audible alarm, the module allows the central station to control the listen/talk mode. After a silent alarm, the module allows listen in only
Have your system announce messages based on events in the home or business. For example, "Guest at front gate" or "Back Door Open". Even receive reminders for medication or to set out your recycling. When a fire or security alarm is tripped, instruct intruders that the police are en route or calmly guide children outside during a fire
The Two-Way Voice Module will allow someone to broadcast messages through the landline telephone by picking it up and dialing #832
Do not mount speakers, microphones, 28A00 modules, or 33A00-4 consoles near any device that may produce noise (fans, air conditioning units, audio speakers, etc.)
Microphones should be connected with 24 AWG or larger, shielded twisted pair wire. Wire length should not exceed 100 feet. Connect the cable shields and negative wires together at the Model 10A11-1, Rev B terminal block only. Do not connect the shield on the microphone end. Additional microphones can be connected to each input in parallel. Speakers should be connected with 18 AWG or larger, twisted pair wire. For wire runs that exceed 50 feet, use 16 AWG wire or larger. Wire length should not exceed 100 feet
Use with HAI Part Number 33A00-4 Omni Console with Built-In Speaker/Microphone, 33A00-20 Lumina Keypad with Built-In Speaker/Microphone, 28A00-1 Surface Speaker Microphone, or 28A00-2 Flush Speaker Microphone
The Model 10A11-1 may be used with Lumina, Lumina Pro, Omni LTe, Omni IIe, OmniPro and OmniPro II home control systems
