Kidde Smoke & CO ProSeries Talking Alarm, Ionization-120V Hardwire with BBU

  120 V AC Talking Smoke & Carbon Monoxide Alarm

   Combined Smoke & Carbon Monoxide Alarm - A single unit can be installed where previously, two were needed. Reduces installation time and protects against both fire and carbon monoxide dangers.

                Intelligent Sensor Technology - Combines the detection capabilities of an ionization smoke sensor with that of an electrochemical carbon monoxide sensor. When either sensor notices a potential hazard, the alarm will adjust its smoke sensitiivity to differentiate between a real hazard and a false one.

                Voice Warning - Announces the hazard type detected (in English and French). Alarm announces "FIRE" when a smoke or fire hazard is detected and announces "WARNING! CARBON MONOXIDE!" when a CO hazard is detected. Also announces "LOW BATTERY" when it is time to replace the batteries.

                120 V Interconnectable - Will interconnect with up to 24 other devices (18 of which can be initiating), including smoke alarms (limit of 12), CO and heat alarms.

                AA Front-Loading Battery Backup - Change batteries without the need to remove the unit from the ceiling, providing continuous protection in the case of a power outage.

                Tamper Resistant - Unit will lock to mounting bracket to deter theft or tampering.

                End of Life Notification - Ten (10) years after unit is first powered, this alarm will beep two times every 30 seconds to indicate it is time to replace the alarm.

                Alarm Memory- The green LED will flash every second during alarm. When the alarm condition goes away, the originating alarm unit will flash the green LED every 16 seconds until the Test / Reset button is pressed, thus resetting the alarm.

                Multi-function One Button Design includes:Test Feature - Tests the alarm circuitry and triggers the voice announcement

                Hush Feature - Temporarily silences nuisance alarms for approximately 9 minutes (will announce "HUSH MODE ACTIVATED,- or "HUSH MODE CANCELLED.").

                Reset Feature - Resets the carbon monoxide alarm

Peak Level Memory - If alarm has detected a CO level of 100ppm or higher since it was last reset, the voice alarm will announce “CAUTION, CARBON MONOXIDE PREVIOUSLY DETECTED

• 900-0119 Datasheet.pdf
• 900-0119 English Manual.pdf