EDI EDCC1 600V CLASS CC TIME-DELAY

Catalog Symbol: EDCC

Time-Delay Current-Limiting

Volts: 600Vac (or less) 300Vdc (or less)

Amps: 0.5 to 30A

IR: 200kA RMS Sym. 20kAIC (0.5- 2.25A and 20-30A)

Agency Information: CE, UL Listed, Std. 248-4, Class CC, Guide JDDZ, File E162363, CSA Certified, HRCI-CC, C22.2 No. 248.4, Class 1422-02, File 53787

Features

o   A superior all-purpose, space-saving branch circuit fuse that meets most protection requirements up to 30 amps.

o   Very compact; physical size is only 13/32" x 1  1/2" (10.3 x 38.1mm) with rejection tip.

o   Faster response to damaging short-circuit currents and higher interrupting rating than mechanical overcurrent protective devices.

o   Maximum 200kA interrupting rating for available fault current in today's large capacity systems. Helps ensure that future growth will not obsolete the system.

o   Time-delay to avoid unwanted fuse openings from surge currents.

o   Fast speed of response under short-circuit conditions for a high degree of current-limitation.

o   The EDCC fuse can be sized close to full load ratings for maximum overload and short-circuit protection.

Dimensions (inches)

o   Can be used where either a time-delay or a fast-acting fuse is needed, making selection easier and reducing spare fuse inventories for substantial cost reduction.

o   Superior Motor Protection for small horsepower motor circuits.

o   Proper sizing can provide Type “2” coordinated protection for NEMA and IEC motor controllers.

o   Motors receive maximum protection against burnout from overloads and single phasing.

• Spec Sheet
• Bus_Edison_DS_EDCC_1300.pdf